HOW TO UPGRADE AUDI Q7 STEREO TO A CARPLAY HEAD UNIT - DIY AUDI Q7 MANUAL

In UNSER BLOG 0 Kommentar

If you're looking to breathe new life into your Audi Q7 with a central control upgrade, you've come to the right place. In this post, I'll walk you through the steps to successfully enhance your vehicle's interior with a modern touch. Let's dive into the transformation process!

Initial Setup and Disassembly

Original Central Control: We'll start with the original setup, which, in older models, often looks a bit dated compared to the sleeker, more advanced systems available today.

Disassembly Tools: Before getting your hands dirty, ensure you have the right tools. For this project, we'll be using a range of disassembly tools specifically suited for car interiors. These typically include screwdrivers, panel removal tools, and possibly some torque wrenches.

Step-by-Step Disassembly

  1. Removing the Air Vents: Begin by gently removing the air vents. This might require some gentle prying and careful handling to avoid damaging the clips or the dashboard itself.

  2. Disconnecting the Plugs: Once the air vents are out, you’ll find several plugs at the back. Disconnect these carefully. A good tip is to take a photo before you start disconnecting. This way, you have a reference for where each plug goes when you reassemble.

  3. Removing the Silver Panel Buttons: Next, turn your attention to the two buttons on the silver panel. These are usually clipped or screwed in, so examine them closely to determine how they're attached and gently remove them.

  4. Unscrewing the Silver Panel: With the buttons out, start loosening the five screws securing the silver panel. It’s crucial not to lose any screws, so keep a magnetic tray handy to hold them.

  5. Under the Steering Panel: Don’t forget the two screws located under the steering panel. These might be a bit trickier to access, so you might need an extended screwdriver or a flexible tool attachment.

  6. Dashboard Removal: Now, it's time to remove the entire dashboard. This step requires caution to avoid straining or snapping any hidden connections.

  7. Disconnecting Dashboard Plugs: As with the air vents, there will be several connections at the back of the dashboard. Disconnect these, remembering to keep track of what goes where.

Installation of the New System

Once everything is disconnected and removed, you'll be ready to install the new central control system. This part of the process involves much of the same steps but in reverse. Carefully place the new system, reconnect all the plugs following your earlier photos or diagrams, and screw everything back into place securely.

Final Thoughts

Upgrading your Audi Q7’s central control can dramatically improve the aesthetic appeal and functionality of your car's interior. Whether it’s achieving a more modern look, increasing the responsiveness of the control system, or just adding a personal touch, it's a worthwhile project.

For those looking to explore more upgrades, like CarPlay installation, large screen navigation setups, or dash cam installations, consider visiting AutoUpgradeClub.com. They offer detailed guides and professional recommendations to help enhance your vehicle’s performance and interior.

Happy modding, and enjoy your newly upgraded Audi Q7!

Recommended Tools and Parts: https://autoupgradeclub.com/products/scumaxcon-10-25-inch-12-3-inch-large-screen-android-central-control-with-wireless-carplay-and-android-auto-navigation-system-for-audi-q7-2005-2015

Hinterlasse einen Kommentar

Deine Email-Adresse wird nicht veröffentlicht. Erforderliche Felder sind markiert *