HOW TO UPGRADE YOUR FORD EVEREST NAVIGATION SCREEN WITH CARPLAY (2016-2021)

In OUR BLOG 0 comment

Hey there, car enthusiasts! Today, we're upgrading the navigation screen of a Ford Everest (2016-2021) with CarPlay. Follow this step-by-step guide to enhance your ride with the latest technology. Let's dive in!

What You'll Need:

  1. CarPlay Upgrade Kit – Ensure it's compatible with Ford Everest (2016-2021).
  2. Trim Removal Tools – For safely removing the dashboard components.
  3. Screwdrivers – Both Phillips and flathead.
  4. USB Cable – For connecting your iPhone.
  5. Microfiber Cloth – To clean the screen and surrounding areas.

Step-by-Step Guide:

Step 1: Prepare Your Vehicle

Park your car in a well-lit, spacious area. Turn off the engine and disconnect the battery to avoid any electrical mishaps.

Step 2: Remove the Trim

Using your trim removal tools, carefully pry off the yellow panels on the left and right sides of the air conditioning button panel. Next, remove the black vent panel on the passenger side, followed by the small left vent and the yellow horizontal panel.

Step 3: Remove the Button Panel

Unscrew the screws securing the button panel and take out the cigarette lighter panel. Disconnect all the wires behind it, ensuring the removal of any remaining screws inside to fully detach the button panel.

Step 4: Remove the Original Head Unit and Screen

Unscrew the original head unit and screen, then gently pull them out and disconnect all the plugs behind them. Keep track of these plugs for reconnecting later.

Step 5: Install the CarPlay Module

Connect the 4G antenna, GPS antenna, RCA cable, and a USB cable to the new head unit as per the instructions provided with your CarPlay upgrade kit.

Step 6: Reconnect the Components

Start by connecting the power cables and the air conditioning panel. Reconnect the three plugs removed earlier to the air conditioning panel. Match and connect the remaining plugs from the original head unit to the new one. If the plugs fit, connect them; if not, leave them.

Step 7: Install the New Head Unit

Connect the new head unit, including the reverse camera cable if your car has a factory camera. Ensure all original USB and radio cables are properly connected.

Step 8: Secure the New Components

Once all connections are made, secure the new head unit and screen with the original screws. Reinstall the cigarette lighter panel and any other components removed earlier.

Step 9: Reassemble the Dashboard

Reattach all removed panels and trim pieces, ensuring they fit snugly and securely. Remove any original clips and attach them to the new parts before installation.

Step 10: Test the System

Reconnect the battery and turn on the system. Adjust the settings and test all functions, including CarPlay, Bluetooth, DSP sound quality, radio, and video playback. Ensure everything is working correctly. Go to factory settings, select the appropriate protocol, car model, and year, then click update. For the first setup, connect the head unit to the network using a mobile hotspot.

Step 11: Enjoy Your Upgrade!

Congratulations! You've successfully upgraded your Ford Everest's navigation screen with CarPlay. Enjoy the enhanced functionality and the convenience of having your favorite apps right at your fingertips while driving.

For more detailed guides and professional assistance with car upgrades, check out autoupgradeclub.com. They offer a wide range of services, from CarPlay installations to large screen navigation setups and dash cam installations. Happy driving!

 

Leave a comment

Your email address will not be published. Required fields are marked *